| Galvanization Standard | ASTM A 123 |
|---|---|
| Surface Treatment | hot dip galvanized |
| Design Load in kg | 300~1000kg applicated to 50cm from the top pole |
| Wind speed | 160km/h, 30m/s |
| Suit for | electricity distribution |
| Style | hot dip galvanized |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Tolance of dimenstion | +-2% |
| Shape | conoid ,multi-pyramidal,columniform，polygonal or conical |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Surface treatment | hot dip galvanized |
| Thickness | 1mm to 30mm |
| Optical assembly of lighting fixture | IP 65 |
| Torelance of dimenstion | +- 2% |
| Galvanization Standard | ASTM A 123 |
|---|---|
| Surface Treatment | hot dip galvanized |
| Design Load in kg | 300~1000kg applicated to 50cm from the top pole |
| Wind speed | 160km/h, 30m/s |
| Suit for | electricity distribution |
| Design load in kg | 300~1000kg applicated to 50cm from the top pole |
|---|---|
| Surface treatment | hot dip galvanization |
| Power | 10kv~550kv |
| Torlance of dimenstion | +- 2% |
| Suit for | electricity distribution |
| Style | galvanization |
|---|---|
| Surface treatment | hot dip galvanized |
| Thickness | 1mm to 30mm |
| Design of pole | against earthquake of 8 grade |
| Torelance of dimenstion | +- 2% |
| Style | galvanization |
|---|---|
| Surface treatment | hot dip galvanized |
| Thickness | 1mm to 30mm |
| Design of pole | against earthquake of 8 grade |
| Torelance of dimenstion | +- 2% |
| Suit for | electricity distribution |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Wind speed | 160km/h, 30m/s |
| tolerance | +/-2% |
| Style | galvanization |
|---|---|
| Surface treatment | hot dip galvanized |
| Thickness | 1mm to 30mm |
| Design of pole | against earthquake of 8 grade |
| Torelance of dimenstion | +- 2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
